Announcement

Collapse
No announcement yet.

Problems adding loads

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problems adding loads

    Hi Tony

    Updated eurobeam to 3.21j and I am having loading input problems

    when I add a load G or QA etc on the first line it transfers this to the load input description which I then have to over write then for a UDL I have to input the 0 in the first box as its left
    empty then I have to tab through W2 to input L in the end box

    I have checked prosteel 7.21j and superbeam 7.21j and these seem to work fine with a UDL load

    regards

    John

  • #2
    This is fixed in 7.21k, now available for download via the Check for Updates option in the usual way.
    Tony Bryer, Greentram Software Pty Ltd

    Comment


    • #3
      hi tony

      I have updated to latest version of eurobeam 3.21k and still need to tab through the start/pos W2 End boxes to add load for a full span UDL before it goes onto the next line

      regards

      John

      Comment

      Working...
      X